分类列表
全自动注液机
  • 全自动注液机
  • 在线询价
    详细内容

    设备技术规格Equipment Specification

    序号

    项目

    技术参数

    说明

    1

    稼动率

    Utilization   Rate

     ≥96%


    2

    合格率

    Pass   Rate

    ≥99.2%


    3

    注液精度

    Injection   Accuracy

    ±0.8%,


    4

    注液量范围

    Injection   Range

    韧尼斯官方网站登录饪傻

    Adjustable


    5

    注液时间

    Injection   Time

    10min


    6

    高压

    High Pressure

    1)高压:400-600KPa;

    控制精度:设定值±5%, 可调

    Control accuracy: ±5% of the desired value, adjustable

    2)压力可调

    Adjustable


    7

    真空

    Vacuum

      -95KPa-0

    控制精度:设定值±5%, 可调

    Control accuracy: ±5% of the desired value, adjustable





    1.    This device is designed for square shaped Lithium Batteryinjection process. It mainly includes pre-injection weighing, injection cup injection, left standing under positive pressure, ect.

    2.       Main features: the use of both High Pressure and Equal Pressure injection process

    3.       High Pressure injection process is to leave the battery stand still under high pressure and vacuum alternately, which is to accelerate the electrolyte absorption. The pressure will be between 0.4 to 0.6 mpa.

            Equal Pressure injection process is to increase the pressure internally and externally at the same time when leave the battery stand still. This will keep the pressure balance, which can avoid bulge or other                 damage.

            This High Pressure – Equal Pressure injection process can greatly improve the electrolyte absorption efficiency and penetration effect, as well as maintaining good consistency and high effciency, hence improve the quanlity of the products.

    1528860238695475.png

    上一篇:四头注液泵
    下一篇:聚合物转盘注液机

    分享到

    XML 地图 | Sitemap 地图