分类列表
全自动注液机
  • 全自动注液机
  • 在线询价
    详细内容

    全自动注液机设备功能原理先容Automatic cylindrical battery electrolyte injection machine introduction)

         本设备是一款针对圆柱形电池工艺的全自动注液机设备(先注液后焊盖帽和先焊盖帽后注液生产工艺本机都适用);设备注液环节只须2人操作;由于不套注液杯,因此设备为多次注液方式,设备将电池所须的电解液分批次注入到电池内部,采用的上注液量递减方式注液;分别是多次注液, 多次抽真空静置,直到电解液完全被电池吸取完成整个注液过程.。由于受设备的工作环境影响,在设计和制作选材方面做到完全的优化,所有的零部件全采用耐腐蚀材料(包括气动元件),机械配件表面全部做耐腐蚀表面处理,加上设备本身无易损件,真正做到后续使用和维护无须材料成本支出。


        This equipment is a automatic electrolyte injection machine designed for cylindrical battery manufacturing (suitable for both pre and post cap welding injection machines). The whole manufacturingline requires only 2 people to operate. Thanks forthe lack of injection cup, the device used multi-injection method, injects the required amount of electrolyte into the battery in batches. The electrolyte is injected in a descending manner, and batteries are left standing under vacuum during injections. The process is repeated until batteries fullyabsorbedall the electroylte. Material selection is optimised for the special working environment of the equipment. Corrosion-resistant materials are used for every component(including pneumatic components), corrosion-resistant surface treatment is done for all the mechanical parts. Furthermore, the equipment itself does not have any fragile components. With all these, this equipment does not require any further investmenton material during future use and maintenance. 



    锂电池注液机


    设备技术参数

    参数名称

    技术参数

    备注

    额定电压

    Rated Voltage

    AC220V 50Hz


    控制电压

    Controlled Voltage

    220V


    总功率

    Power

    15KW


    压缩气压

    Compressed Pressure

    0.7mpa


    真空

    Vacuum

    -0.095%


    氮气

    Nitrogen

    0.3mpa


    生产效率

    Production Rate

    60-80ppm/min

    此产品视电池容量和工艺不同,产生会有所差异

    This will varydepending   on the different battery volume and manufacturing process.

    注液精度

    Injection Accuracy

    ±0.1克

    注液泵每次注液量偏差≤0.02克

    The variation of the injection quantity of the pump is 0.02 g

    设备外形尺寸(长**高)

    Dimensions (Length*Width*Height)

    12M*1M*1.9M

    手套箱除湿所须内空体积为10立方米。

    The required volume for   dehumidifcation in the Glovebox is 10 m3.

    稼动功率

    Utilization Rate

    95%


    生产合格率

    Pass Rate

    99.5%


    有效除湿体积

    Effective Dehumidifcation   Volume

    10.5m3


    漏气率

    Leakage Rate

    <0.05 VOI%/小时


     



    上一篇:四头注液泵
    下一篇:全自动方型注液机

    分享到

    XML 地图 | Sitemap 地图